In February, the grass grows and the warblers fly, brushing the embankment with willows and drunken spring smoke. Everything is reviving, and the romantic atmosphere of flowers is scattered in the spring breeze. In February, let's meet at Lianneng Home in Nanjing and meet QMAXIS metallographic consumables with high cost-effectiveness. They were carefully selected by Lianneng's editor to express our sincere intentions.

     Diamond&CBN cutting blades: The original imported QMAXIS (Kemai) diamond&CBN cutting blades are suitable for metallographic precision cutting machines and metallographic grinding wheel cutting machines, respectively. Diamond&CBN cutting blades have high hardness and thin thickness, resulting in fast cutting speed, less material wear, and minimal surface deformation, which is more conducive to subsequent grinding and polishing. The service life of cutting blades is longer than that of other materials, and the converted comprehensive cutting cost is relatively lower. Diamond&CBN cutting pieces with different concentration, particle size and bonding process can meet the cutting requirements of different materials, and are very awesome cutting pieces for metallographic specimen cutting!


&Flash& Flash; Diamond&CBN cutting blades with an axial aperture of 12.7mm: 3in, 4in, 5in, 6in, 7in, 8in


&Flash& Flash; Diamond cutting blade with an axial aperture of 32mm: 10in

    Cold embedding resin and curing agent: Original imported QMAXIS (Kemai) cold embedding resin and curing agent from the United States, including epoxy resin system and acrylic resin system. Low viscosity, low shrinkage rate, strong permeability, and good edge protection effect, suitable for room temperature inlay of materials sensitive to temperature and pressure. The operation is simple, convenient, and widely used, making it very suitable for single batch sample preparation.


&Flash& Flash; EpoQuick epoxy resin and curing agent, 2 hours


&Flash& Flash; EpoCure epoxy resin and curing agent, 6h


&Flash& Flash; EpoFlow epoxy resin and curing agent, 9h


&Flash& Flash; EpoLi ion epoxy resin and curing agent, 24h/25 ℃ or 2h/60 ℃


&Flash& Flash; AcryQuick acrylic resin and curing agent, 8-12 minutes

     Metallographic polishing cloth: The original imported QMAXIS (pulse) polishing cloth from the United States is made of various excellent polishing fabrics such as woven fabrics, non-woven fabrics, flocked fabrics, chemical corrosion resistant synthetic materials, etc. For different materials and polishing stages, polishing cloths with different weaving properties can be selected, combined with polishing liquids or pastes with different abrasives and particle sizes, to achieve surface effects at different process stages.


&Flash& Flash; Coarse throwing: PlanCloth, PerfoCloth, NylonCloth


&Flash& Flash; Middle throw: DuraCloth, SatinCloth, SilkCloth


&Flash& Flash; Fine polishing: MicroMet, VelCloth, FlocCloth, ChemoCloth


QMAXIS metallographic consumables are like a spring breeze, warming this February and you. Let's meet in Nanjing Chain in February this year and meet your favorite QMAXIS metallographic consumables!